ARCHIVE CONTENTThis resource is not the newest version and may contain issues fixed in later versions. Unless you have a particular reason for wanting this file, you should get the newest version which is linked from the product page or the support page. The resource that replaced this one is linked to below.
USB Driver - FTDI based products
Zip file containing USB virtual COM port drivers for multiple AIM-TTi devices.
To use, unzip the files into a new directory on your computer. The Windows installer must be pointed to this directory when the device is plugged in. These drivers need to be configured in your application to set up the virtual COM port rates appropriate to the connected hardware. For all devices this is 8 data bits, 1 stop bit, no parity, but the baud rate varies.
- HA1600: 115200 baud
- QL Series 1 Power Supplies: 19200 baud (QL Series II use a different driver)
- TF930 and TF960 Frequency Counters: 115200 baud
- TG2000 Function Generator: baud rate set to match that selected in the hardware
Separate instructions are in the installation notes linked to below.
This version is signed with SHA1 hash and is not Windows 10 compatible.
See newer version: USB Driver for FTDI based products