News: New high frequency arbitrary generators
ARCHIVE CONTENT
The content below is no longer current and may not be applicable or relevant.
The TGF3000 series goes from 1µHz to 160MHz and offers unrivalled value for money.
The new TGF3000 series initially consists of two models, the TG3082 (dual channel, 80MHz, 14 bits / 400MS/s) and TG3162 (dual channel 160MHz, 16 bits / 800MS/s).
The two identical full performance channels can operate as independent generators or in coupled or tracking modes. Precise channel to channel phase control with a resolution of 0.001°is provided.
The two identical full performance channels can operate as independent generators or in coupled or tracking modes. Precise channel to channel phase control with a resolution of 0.001°is provided.
A wide range of built-in waveforms is included and custom arbitrary waveforms can be used at sample speeds up to 800MS/s and replay rates up to 80MHz. PC based arbitrary waveform generation and editing
software is provided.
High resolution, low jitter pulses can be generated and the noise function provides wideband gaussian noise at bandwidths up to 100MHz and crest factor of more than five.
A extensive array of modulations is provided using internal and external sources. Gated, burst and sweep modes can use internal or external trigger sources.
Remote control via USB and LXI compliant LAN (standard) can be supplemented by optional GPIB if required.
All this and more, without neglecting the basics such as high sine wave purity with low phase noise and jitter, and audio band THD down to 0.05%.
Find out more on the product page (link below) where prices, data-sheet and manuals are available.
All this and more, without neglecting the basics such as high sine wave purity with low phase noise and jitter, and audio band THD down to 0.05%.
Find out more on the product page (link below) where prices, data-sheet and manuals are available.